Everything you need to boost the development of your own electronics devices. SmartScope software combined with the Lab-Nation hardware is the oscilloscope in the world that runs on all major platforms: Windows, OSX, Linux, Android and iOS (with wifi bridge). Connect the SmartScope to pretty much any device!

The oscilloscope software supports the hardware and provides the following capabilities:

Oscilloscope Functions

• Bandwidth 30 MHz -3dB point
• Sample rate 2 × 100 MS/s
• Channels 2
• Max pre-trigger position 16 × full scale
• Max post-trigger position Full scale
• Max full voltage scale 10V/div ±35V input range
• Min full voltage scale 20mV/div
• Analog input range -35V, +35V
• Max input peak-to-peak 40V
• Signal coupling AC / DC
• Precision 8 bit
• Input impedance 1 MOhm // 10 pF
• Waverforms 200 waveforms/s
• Data delay to host Sample depth Up to 4 million samples per channel
• External triggering

Logic Analyzer

• Input channels 8
• Input impedance 100kOhm // 2pF to GND
• Sample rate 100 MS/s
• Logic level 1,8 V to 5,0 V
• Diode protection Bidirectional
• Input data buffer 4 million samples
• Waveforms 200 waveforms/s
• Data delay to host Protocol decoders I2C, SPI, UART, I2S integrated User extensible

Wave Generator - Analog Output

• Channels 1
• Data rate Up to 50 MS/s
• Output level 0 - 3,3 V Opamp driven
• Output buffer Up to 2048 samples
• Max slew rate 30ns/V
• Step 13 mV

Wave Generator - Digital Output

• Channels 4
• Data rate Up to 100 MS/s
• Output level 3,3 V or 5 V selectable
• Output buffer Up to 2048 samples
• Diode protected