Angular range finder: One only needs to enter the height in ft from the archer's shoulder to the ground. When activated, the yardage based on the angle the bow is being held and height will be displayed in the middle of the screen directly above the ring. For improved accuracy if the distance is below 20 yards, over a maximum set yardage, or if the water level is tilted beyond the level 1 alert a message will be displayed to the user notifying the archer if the distance is "out of range" or "unreliable". The height of the archer's shoulder to the ground as entered will always be displayed on the upper lefthand corner just under the current profile name.Selection switches have been added to the profile description window to allow the archer to select between single pin and multi pin sight configurations. Single pin mode allows a single pin set up with side tape arrangements. The side tape allows the archer to adjust the single pin distance by simply sliding a finger along the yellow glow on the far left side of the screen. When sliding a finger, the archer will notice the side tape appears showing each pin with its respective distance. While in single pin mode, the current pin yardage will be displayed on the upper righthand corner. This mode makes calculating pin yardages effortless.